The LioN-Link system consists of bus coupler modules which provide the connection between the entire field-bus system and the field-bus independent I/O modules. Based on a BusHead, the I/O module is distributed decentrally to the field via two lines. A total of 15 devices per branch can be connected to the system for a total extension of 100 m per branch.
The wiring of the LioN Link modules uses simple standard wiring components such as actuator/sensor cord sets, single or double ended, for the I/Os and for the power supply or CAN/DeviceNet thin cables for the link connection. This means that no manufacturer-specific wiring components are required. Because of that, the system offers a cost optimized and cost transparent wiring solution which is installed in the plug-and-play procedure and put into operation. No terminator is necessary for the connection of the last LioN Link module in a line.

Degree of protection: IP 67
Operating temperature: −10 °C to +60 °C
Node ID: 1 to 99_d (Hardware switch setting), 1 to 127_d (Software setting)
Default Address: 63_d

You will find all technical information at our Website in detail.

Following types are available:

BusHead

• 0940 CSL 601 BusHead CANopen

LioN-Link module universal I/O digital

• 0942 UEM 600:  8 in/out universal  4 × M12
• 0942 UEM 650:  8 in/out universal  8 × M8
• 0942 UEM 700: 16 in/out universal  8 × M12
• 0942 UEM 780: 16 In/out universal  multipole cable interface

LioN-Link module output digital

• 0942 UEM 780:  16 out  multipole cable interface

LioN-Link module input digital

• 0942 UEM 601:  8 in  4 × M12
• 0942 UEM 651:  8 in  8 × M8
• 0942 UEM 701: 16 In  8 × M12